| Into | Inani elijwayelekile | Iyunithi |
| Usayizi | 2.3 | Intshi |
| Isixazululo | 320RGB*240 amachashazi | - |
| Ubukhulu bokuphuma | 51.00(W)*45.80(H)*2.3(T) | mm |
| Indawo yokubuka | 46.75(W)*35.06(H) | mm |
| Uhlobo | I-TFT | |
| Ukubuka isiqondiso | 12 O' Clock | |
| Uhlobo lokuxhuma: | I-COG + FPC | |
| Izinga lokushisa lokusebenza: | -20 ℃ -70 ℃ | |
| Izinga lokushisa lesitoreji: | -30 ℃ -80 ℃ | |
| Umshayeli IC: | I-ILI9342C | |
| Uhlobo lwe-Interfce: | I-MCU&SPI | |
| Ukukhanya: | 200 CD/㎡ | |
Ngakho-ke, izinga lokushisa lokushintsha kwesigaba le-liquid crystal material linquma ububanzi bezinga lokushisa lokusebenza ledivayisi yokubonisa ikristalu eliwuketshezi.Ithebula 1 libonisa ubudlelwano phakathi
Amapharamitha we-liquid crystal material afanelekile nezici zedivayisi yokubonisa ikristalu ewuketshezi ehlobene nayo.Amapharamitha we-liquid crystal material acacile kakhulu
I-Point Tp (iphuzu lokushintsha kwezinga lokushisa ukusuka esigabeni sekristalu ewuketshezi ukuya esigabeni se-isotropic), iphoyinti lokuphulukisa i-Ts.N (ukuguqulwa ukusuka esigabeni se-nematic ukuya esigabeni se-smectic noma isigaba esiqinile)
Iphoyinti lokushisa), i-optically anisotropic birefringence On, i-dielectric anisotropy Oε, i-elastic constant Kn (i-splay elastic constant),
I-K22 (i-torsional elastic constant), i-K33 (i-flexural elastic constant), i-viscosity ejikelezayo y, njll.
| Ipharamitha | Uphawu | Inani elijwayelekile | Amazwana |
| Iphuzu lokusula | Tclp | 80°C. | Ubukhulu.izinga lokushisa lokusebenza |
| I-Smectic-Nematic ltransition | Ts-N | - 40°C. | Okuncane.izinga lokushisa lokusebenza |
| I-Optical anisotropy | I-n=n//-n L | 0.085=1.562-1 .477 | Inquma ukuziphatha kokubona |
| I-Dielectric anisotropy | 0 ε=ε//_ε⊥ | 7=10.5-3.5 | Inquma ukuziphatha endaweni kagesi |
| I-Elastic constants | K11,K22, K33. | 10-11Newton | Kubalulekile ngesikhathi sokuphendula |
| I-Rotational viscosity @20°C | Y 1 | 100 mPa s | Kubalulekile ngesikhathi sokuphendula |
